TRN (FileFormat)
TGEN - Terrain Generator
Terrain generator (form name : TGEN) There are 6 different sections.
- The Surface group (SGRP) - The Flora group (FRGP) - The Radial? group (RGRP) - The Environment group (EGRP) - The -unamed- group (MGRP) - The Layers group (LYRS)
SGRP - Shader Group
Where all the surfaces are declared. (Select shader group properties.)
It's sub-divied into multiple surface families (SFAM).
Each one of them declare mutliple shaders using a surface file.
53 46 41 4D 00 00 00 70 04 00 00 00 66 72 73 74 5F 64 65 63 SFAM...p....frst.dec 64 5F 72 6F 63 6B 6D 75 64 00 61 62 73 74 72 61 63 74 2F 74 d.rockmud.abstract.t 65 72 72 61 69 6E 5F 73 75 72 66 61 63 65 2F 68 61 72 64 64 errain.surface.hardd 69 72 74 2E 69 66 66 00 C7 AA 83 00 00 00 40 00 00 80 3F 02 irt.iff............. 00 00 00 64 69 72 74 5F 72 6F 63 6B 6D 75 64 00 00 00 20 41 ...dirt.rockmud....A 64 69 72 74 5F 72 6F 63 6B 6D 75 64 5F 61 31 00 00 00 A0 40 dirt.rockmud.a1.....
Here its declares 2 shaders: dirt.rockmud, dirt.rockmund.a1 using abstract/terrain_surface/harddirt.iff
???? - Shader Child
Select shader child rule properties, including family name data, and shader weight data.
FGRP - Flora Group
Where all the flora groups are decared using appearance files. (Select flora group properties, including flora family data.)
Each one of them decalre one flora group using multiple appearance files.
46 46 41 4D 00 00 01 CE 01 00 00 00 47 72 61 6E 69 74 65 20 FFAM........Granite.
52 6F 63 6B 73 31 00 00 80 FF 00 00 80 3F 00 00 00 00 07 00 Rocks1..............
00 00 72 6F 63 6B 5F 67 72 61 6E 69 74 65 73 6C 61 62 5F 6C ..rock.graniteslab.l
61 72 67 65 2E 61 70 74 00 00 00 80 3F 00 00 00 00 0A D7 23 arge.apt............
3C CD CC CC 3D 01 00 00 00 00 00 00 00 00 00 80 3F 00 00 80 ....................
[...] [...]
00 00 80 3F 00 00 80 3F 72 6F 63 6B 5F 67 72 61 6E 69 74 65 ........rock.granite
73 6C 61 62 5F 73 6D 61 6C 6C 5F 61 31 2E 61 70 74 00 00 00 slab.small.a1.apt...
A0 40 00 00 00 00 0A D7 23 3C CD CC CC 3D 01 00 00 00 00 00 ....................
00 00 00 00 80 3F 00 00 80 3F ..........
Here it declares a group named 'Granite.Rocks1' wich contains graniteslab of different sizes.
???? - Flora Child
Select flora child rule properties, including flora family name, child weight data, swaying displacement and period, scaling min/max value.
RGRP - Radial Group
I Don't know much about this one yet. (Select Radial Group properties.)
???? - Radial Child
I Don't know much about this one yet. (Select Radial child rule properties, including family name data, child weight, distance, width and height data, and swaying displacment and period data.)
EGRP - Environment Group
Declares the environement
45 46 41 4D 44 41 54 41 00 00 00 19 01 00 00 00 74 61 61 6E EFAMDATA........taan 61 62 5F 67 6C 6F 62 61 6C 00 FF FF 00 00 00 80 3F ab.global........
MGRP - -unamed- Group
Where all the fractal are decalred. It's sub-divied into multiple groups (MFAM). Each one of them declare a labelled fractal.
4D 46 41 4D 44 41 54 41 00 00 00 27 01 00 00 00 2E 30 30 31 MFAMDATA.........001 35 5F 6F 63 74 31 5F 6E 62 69 61 73 5F 42 61 73 65 52 6F 6C 5.oct1.nbias.BaseRol 6C 69 6E 67 48 65 69 67 68 74 00 46 4F 52 4D 00 00 00 4C 4D lingHeight.FORM...LM 46 52 43 46 4F 52 4D 00 00 00 40 30 30 30 31 44 41 54 41 00 FRCFORM....0001DATA. 00 00 34 A0 11 00 00 00 00 00 00 79 E9 E6 3E 00 00 00 00 00 ..4........y........ 00 80 3F 01 00 00 00 C1 CA 61 40 FC A9 71 3D A6 9B C4 3A FA .........a...q...... ED EB 3A 00 00 00 00 00 00 00 00 00 00 00 00 ...............
This one decalres a fractal labeled 'oct1.nbias.BaseRolling Height' TODO: Add fractal notes here.
LYRS - Layers Group
Layers & Affectors
Basically the role of layers is to affect the data contained in the different families. They can contain any number of other sub-layers. Their order is important.
A layer deals with the families trough Affectors. There are different types of them, each one has it's own role. Can have Affector for texturing, flora, areas...
Known Affectors
| BREC | Boundary Rectangle | Delimits a rectangle using 4 float: X1, Y1, X2, Y2 (Select rectangle boundary rule properties, including feathering distance, boundary left/right and near/far coords and local water table height, shader and sahder size.) |
| BCIR | Boundary Circle | Delimits a circle using 3 float: Xo, Yo, Radius (Select circle boundary rule properties, including feathering distance, boundary center coords, and boundary radius.) |
| BPOL | Boundary Polygon | Delimits a n-sided closed polygon area using 2 floats (Xo,Yo) for each point. (Select polygon boundary rule properties, includibng feathering distance and including local water table height, shader and shader size.) |
| BPLN | Boundary PolyLine | Delimits a n-sided line area using 2 floats (Xo,Yo) for each point and a float for the width. (Select polyline boundary rule properties, including feathering distance and width.) |
| FFRA | Filter Fractal | Delimits an area generated by a 2d fractal on the ground. (Select filter fractal rule properties incuding fractal family, low and high fractal settings and feathering distance.) |
| ASCN | Affector Shader Constant | Affect a shader using the family_id and the shader_id this family. (Select rule shader and family and feathering parameters.) |
| ASCR | Affector Shader Replace | Replace a shader with another shader (Select rule shader replace families, including source family (the family to be replaced), destination family (the family to replace with), and feathering parameters.) |
| ???? | Filter Shader | Select filter shader rule properties, including shader family. |
| AHCN | Affector Height Constant | Raises or lowers the ground using float for delta and float(scalar?) for slope-smooting. |
| AHFR | Affector Height Fractal | Raises or lowers the ground irregulary using a fractal type from the Fractal Family.Float for delta and float(scalar?) |
| AHFT | Affector Height Terrace | Select terrace height and flat ratio values for rule. |
| AFSC | Affector Flora Static Collidable | Sets the amount of collidable flora. (Select to add/remove flora, specify flora tpe and set flora density for static collidable flora.) |
| AFSN | Affector Flora Static Non-Collidable | Sets the amount of Non-collidable flora. (Select to add/remove flora, specify flora tpe and set flora density for static non-collidable flora.) |
| AFDN | Affector Flora Dynamic Near | I don't know much about those yet. Seems like they change the near/far radial displaying. They're often coupled to the flora affectors, for instance when cleaning an area for a city. (Select to add/remove flora, specify flora type and set flora destiny for dynamic near flora.) |
| AFDF | Affector Flora Dynamic Far | (Select to add/remove flora, specify flora type and set flora destiny for dynamic far flora.) |
| AENV | Environment | Select enviroment group rule properties. |
| ???? | Filter Direction | Select filter direction rule properties, including feathering distance, and min and max angle settings for filter setting to have effect. |
| FHGT | Filter Height | Select filter height rule properties, including feathering, distance, filter low height, and filter high height. |
| ???? | Filter Slope | Select filter slope rule properties, including feathering distance, filter min angle, and filter max angle. |
| ???? | Affector Road | Select road rule properties, including width, shader, feathering height distance, and feathering shader distance. |
| ???? | Affector River | Select river rule properties, including width, trench depth, flow velocity, bank and bottom shaders, water shader, water depth, water width, feathering distance. |
| ???? | Affector Color Constant | Select color for rule. |
| ???? | Affector Color Constant | Select color for rule. |
| ACRF | Affector Color Ramp Fractal | Select rule family and color ramp. |
| ???? | Affector Color Ramp Height | Select rule color ramp and height low/high values. |
Examples
...
