Struct
| SHORT
|
Operand_Count
|
| INT
|
Opcode
|
| LONG
|
ObjectID
|
| SHORT
|
PositionX
|
| SHORT
|
PositionY
|
| SHORT
|
PositionZ
|
| INT
|
UpdateCounter
|
| BYTE
|
Posture
|
| BYTE
|
Direction
|
Variable Descriptions
Opperand_Count = 8
Opcode = 1B24F808
- ObjectID that you are listing attributes for.
- New Position of Object. The value is transformed the following way.
n = X / 4;
if n > 8192 n = n - 16384;
effective map range is -8192..8192
to convert the a float to position
n = uint16(x * 4.0f + 0.5f);
- Number of movement updates the object has done.
- Used to distinguish new updates from potential repeats.
- Incremented by 1 each packet.
The byte before direction corresponds to:
| value |
State
|
| 0 |
Upright
|
| 1 |
Crouched
|
| 2 |
Prone
|
| 3 |
Sneaking
|
| 4 |
Blocking
|
| 5 |
Climbing
|
| 6 |
Flying
|
| etc |
etc...
|
Haven't seen it out side the range of 0..5 yet
- This is the direction for the object to face after moving.
- It is calculated by (Angle / 0.0625) where angle is in radians.
- This packet needs to be sent frequently to prevent start/stop in a movement stream.
- Also, shorter distances at slower frequency will create slower speed.
:OLD--DATA--Found this to be the posture byte
- This byte seems to be related to the 2 variances of ObjController Transform Packets
- used (23 vs 21). See them for further detail. The 23 seems to be sent
- in a Data channel signifying it being important. This byte is related to a
- count of 21's the occur between a group of 23. The 23 is assumed to be start/end
- of a chain of movement while the 21 is an update.
- |valign=top|
Tags
| S→C
|
This packet originates on the server.
|
|
| 100%
|
This packet has been completely reversed.
|
|
|
Sample Packet
Insert Sample Packet Here...
