Navigation

Assembly Overview

There are two factors that go into the process of determining an item's statistics; these are Assembly and Experimentation. Assembly is the starting point of this process. Assembly in its literal sense, is the putting together of the components and resources to create an item. Most crafted items have a set of experimental lines in which have individual properties under them. These properties are a control and bottleneck for the value of the stats that are associated with them. The properties are associated with a particular resource stat and the amount to which that stat weights or factors into the increase/decrease of the stats of this item. The value that gets returned from this process of weighting factors comes in a percentage range from 0 to 100%. The total length of the range between 0 and 100 is determined by the weighting factors of the resources and experimental property. When an item is assembled or experimented on, a portion is added to the range. For every increase in the value in the range beyond 0, the item's stats increases. The process of assembly is to add a starting value to the range. Experimentation will add onto this base starting value on up to a maximum of 100%.

For a closer look at the mathematics behind this process, see the Formulas in Review section below.

Part I. Assembling the item

Assembling an item begins at stage 2 of the crafting process when the player is inputting resources into the draft schematic slots. After the appropriate slots requirements have met, the player may advance the crafting process by clicking the Assemble button on the lower right. Upon clicking this, the game performs a number of calculations on the item which involved a number of factors such as player skill modifiers, a random chance roll, and environmental effects on the roll. These factors are designed to determine the type of success that the assembly attempt will have produced.

Success with the exception of critical failures, have no bearing on the starting values of the items. The various types of success rates available to assembly results are as follows:

As shown above, Each type of success will vary depending on the success roll made. The only success rate of consequence are Critical Failures. When a critical failure occurs, the player loses all resources used (but not components) and the item fails to be produced. Essentially the player must start over with crafting the item if a critical failure event happens.

Part II. The Assembly Success & Roll Detailed

As mentioned previously, after clicking the assemble button on the crafting menu, a process takes place in which determines the success choice that is displayed to the player. This result is based upon two things which will be called the Success Rate, and the Roll.

Success rate:

• 1) Experimentation Skill including skill clothes. Any possible cap is unknown.

• 2) Mallability of the resources used. (Higher MA is better)

• 3) Number of experiment points spent in each attempt. (Fewer is better)

Roll:

• 4) Being in a Research City.
• 5) Drinking Bespin Port.

These doesn't seem to affect the success rate, so they may only be used on the roll: 6) Crafting Tool Quality. 7) Crafting Station Quality.

Unknown (I have no experience with FS, but logically it should affect the success rate): 8) FS experimentation.

By their very nature Success Rate and Roll stack since they are basically added to produce the result. Within each part; 1, 2 and 3 stack. I don't know about 4 and 5. 6 and 7 is too low to measure.

Good success rate makes higher results more likely. Good roll does the same and reduces critical failures too

The assembly roll is modified by:

Your Assembly skill mod (dependent on the schematic used and your skills) modified by the quality of the tool modified by the quality of the private crafting station modified by the effects of pyolian cake or any other bonuses (city, clothing, etc) applied to the roll = outcome.

The experimentation roll. This roll determines the success of your experimentation attempt, crit fail, big fail, etc. One roll per click of the 'perform experiment' button.

Like Assembly, the roll is modified by your experimentation skill mod, quality of the tool, quality of the station, bespin port, city bonus, etc.

http://forums.swganh.org/viewtopic.php?f=23&t=233

To reveal the mystery abour crafitng, and why you get different stats at the same experimental percentages on two different crafting sessions. You first have to calculate the weighted average for each single stat line. Since Estei and me found that the displayed percentage for assembly and experimentation is an average of each line, meaning that the displayed percentages for Experimental Damage is the average for Speed, Min, Max and Wound Chance. Same thing goes for Experimental Efficiency which is the average of Health, Action, Mind and Force Cost. To calculate the displayed assembly percentage you need to know the weighted average of all the available lines and then divide that number by four. And knowing the percentages for each line is very important since using resouces that gives you a better displayed percentages might not be the best for the single line.

http://forums.swganh.org/viewtopic.php?f=23&t=199&sid=b46cad20d33b55015ee6ed5597c57430

Almost every item that can be experimented on has stats . These stats are tied to particular experimentation categories. Wind generators have two categories: Efficiency (tied to extraction rate) and Storage (tied to hopper size).

The experimental categories are displayed as percentages between 0% and 100%. The success type of the experiment ("good success", "great success", "moderate failure") determines how much improvement (or deterioration) is applied to that percentage. For example, a "great success" increases the category +7 for every point you spent; spend 5 points and get a great success, and the percentage increases by 35.

Stats on in-game items have a minimum value (at 0% experimentation) and a maximum value (at 100%). The actual value of the stat is calculated using a linear scale between these two points and the experimental percentage you reached. You take the minimum stat value and add the stat range (Max - Min) times the experimental percentage.

For example, crafting tools have a minimum effectiveness value of -15 and a maximum effectiveness of 15. If you experiment Effectiveness to 65%, the actual stat will be:

-15 + (15 - (-15) ) * 0.65 = -15 + 30 * 0.65 = 4.5

The higher you experiment a category, the closer you get to the max possible on the stats associated with that category. In elite crafting professions (mainly weaponsmith and armorsmith), items have subcomponents which also influence final stats.

The limits on the "best" item you can make is determined by the hard-coded maximum at 100% experimentation,and resource quality. Resource stats determine both the maximum experimentation percentage and (along with the assembly success) the starting experimentation percentage

http://forums.swganh.org/viewtopic.php?f=23&t=214

Every time you experiment, the item complexity raises by 1, which raises the risk of failure. (I also heard that higher complexity item requires higher rate of insurance, though I cannot verify this). It�s recommended to spend multiple points every experiment to reduce the chance of failure. Also you should only spend points in one attribute only in every experiment attempt since addition attributes beyond the first attribute adds +5% to the total risk. It�s better to spread the experiments on several attempts and one attribute per attempt.

stats

Your assumption is correct, all experimentation in SWG uses this formula :

Stat = [Base value at 0% experimentation] + ([Increase/%] x [Experimental Percentage])

For example : X-Wing : Mass = 97500 + (5000 x E) with E = Experimental Percentage

The initial and maximum Experimental Percentage depend on the resource stats, resource amounts and the applicable stat percentages for the item youre making. These values make up the Weighted Resource Value and determine the initial and maximum experimental percentage this way :

Initial EP = 0.00000015 x WRV^2 + 0.00015 x WRV Maximum EP = 0.001 x WRV

Source References